NC Nano Stone Cleaner

Features of NC Nano Stone Cleaner

🔵 Provides a deeper clean than many conventional stone cleaners
🔵 Suitable for interior and exterior mineral surfaces, including patios, driveways, walls and façades
🔵 Ideal for concrete, paving, tiles and a wide range of natural and manufactured stone surfaces
🔵 Suitable for both routine cleaning and professional maintenance
🔵 Effectively removes common dirt, grime and stubborn surface deposits
🔵 Fast, active and effective cleaning without the need for aggressive cleaning methods
🔵 Liquid, water-soluble formulation
🔵 Biodegradable formulation*

More Information About NC Nano Stone Cleaner

Meet NC Nano Stone Cleaner, a powerful specialist cleaner developed for the thorough cleaning of mineral surfaces both indoors and outdoors.

It is ideal for removing everyday dirt, grime and stubborn deposits from surfaces such as stone, concrete, paving, patios, driveways, walls and façades.

NC Nano Stone Cleaner is suitable for both routine maintenance and more intensive cleaning and can be used on a wide range of compatible mineral substrates, including concrete, natural stone, brick and unglazed tiles.

Its powerful cleaning action works more deeply than many conventional surface cleaners, making it an excellent first step when preparing a mineral surface for further treatment or protection.

Suitable for Patios, Driveways, Walls and More

NC Nano Stone Cleaner can be used on a wide variety of indoor and outdoor mineral surfaces, including:

• Patios
• Paving slabs
• Driveways
• Concrete
• Concrete floors
• Brickwork
• Walls
• Façades
• Natural stone
• Granite
• Sandstone
• Slate
• Terracotta
• Unpolished marble
• Mineral render
• Basalt
• And other compatible mineral surfaces

Different mineral surfaces can react differently to cleaning products, particularly natural stone.

For this reason, always test the cleaner on a small, inconspicuous area first before treating the entire surface.

Powerful Cleaning for Outdoor Surfaces

Exterior stone, concrete and paving are continuously exposed to rain, dirt and general environmental contamination.

Over time, these deposits can leave the surface looking dirty, dull and neglected.

NC Nano Stone Cleaner helps loosen and remove this accumulated contamination, restoring a cleaner and fresher appearance to the surface.

Clean First, Protect Afterwards

Thorough cleaning is particularly important when preparing stone, concrete or paving for a protective nano coating.

Dirt and other contamination can interfere with the penetration and performance of the coating.

After cleaning, rinsing and allowing the substrate to dry completely, compatible mineral surfaces can be protected with NC Nano Coating for Stone, Concrete & Tile.

The cleaner therefore provides the ideal preparation step before applying our protective nano treatment.

Product Specifications

Suitable substrates:	Mineral surfaces including walls, façades, concrete, floors, granite, sandstone, slate, brick, terracotta, unpolished marble, mineral render and basalt
Material compatibility:	Suitable for a wide range of compatible interior and exterior mineral surfaces. Always test delicate or unfamiliar materials on a small, inconspicuous area first.
Key properties:	Deep-cleaning action for dirt, grime and stubborn surface deposits
Application method:	Trigger sprayer, low-pressure sprayer, masonry brush or scrubbing brush
Application temperature:	5°C to 30°C Use in dry conditions. Lower temperatures may slow down the cleaning action, so additional contact time may be required in cooler conditions.
Coverage:	Approx. 5–15 m² per litre Actual consumption depends on the type and level of contamination and the porosity of the substrate.
pH:	Alkaline – approx. pH 10
Dilution:	Ready to use. Depending on the level of contamination, NC Nano Stone Cleaner may be diluted with water by up to 1:10.
Shelf life and storage:	12 months when stored correctly. Store in a cool, dry place between 5°C and 30°C and keep the bottle securely closed.
Shelf life:	At least 24 months in the original unopened packaging. Store in a cool, dry and frost-free location.
Brand:	NC Nano
Pack size:	1-litre bottle
Ready to use:	Yes – may also be diluted where appropriate
EAN:	-

Get the Best Results in 5 Simple Steps

Before starting, please take the following practical information into account.

Do not mix NC Nano Stone Cleaner with other cleaning products or chemicals.

Lower temperatures may slow down the cleaning action, so allow additional contact time where necessary.

Always test the cleaner on a small, inconspicuous area first to check both compatibility and the cleaning result.

Step 1 – Prepare and Apply the Cleaner

Make sure the surface is dry before application and shake the bottle well before use.

Depending on the level of contamination, NC Nano Stone Cleaner can be used undiluted or diluted with water by up to 1:10.

Apply the product using a trigger sprayer, suitable low-pressure sprayer, masonry brush or scrubbing brush.

When using a pump or backpack sprayer, transfer the required amount of cleaner into the equipment and wet the surface evenly.

Step 2 – Allow Approximately 30 Minutes to Work

Allow the product to work on the surface for approximately 30 minutes.

At lower temperatures or on heavily contaminated surfaces, a longer contact time may be required.

Do not allow the cleaner to dry completely on the surface during treatment.

Step 3 – Scrub the Surface

After allowing sufficient contact time, thoroughly scrub the surface using a suitable broom, brush or stiff scrubbing brush.

Work the cleaner into the surface to help loosen stubborn dirt and deposits.

Take additional care on softer or more delicate natural stone.

Step 4 – Rinse Thoroughly

Rinse the treated surface thoroughly with plenty of clean water.

Make sure loosened dirt and all remaining cleaning-product residue are completely removed.

Take care to control cleaning water and runoff around surrounding materials, vegetation and drainage areas.

Step 5 – Repeat or Protect

Repeat the treatment where necessary on heavily contaminated surfaces.

After the final treatment, rinse thoroughly and allow the substrate to dry completely.

For additional protection against water penetration and dirt absorption, treat a suitable clean and dry mineral surface with NC Nano Coating for Stone, Concrete & Tile.

After Cleaning: Protect the Surface

Once stone, concrete or paving has been thoroughly cleaned and is completely dry, it can be protected with NC Nano Coating for Stone, Concrete & Tile.

The nano treatment helps create a water-, dirt- and oil-repellent surface, making future maintenance easier and helping reduce the absorption of water and contamination.

Want to Learn More About Nano Coatings?

Read our nano coating guides and articles to find out more about protecting and maintaining stone, concrete, paving, glass and other surfaces.

Product Information & Safety Documents

• Safety Data Sheet (SDS)

• Product Data Sheet